9100 System DTM Epoxy Mastic Fast-Cure Activator: • Faster cure to minimize downtime • Recoat in 4 hours at 21°C (70°F) and 50% RH • For air and surface temps of 10-38°C (50-100°F) • Produces slightly lower gloss than standard activator
Use the 9104402 Fast Cure Activator at air temperatures between 50-120°F (10-49°C) and when the surface temperature is at least 5°F (3°C) above the dew point and less than 120ºF (49ºC). Low curing temperatures and/or condensation on the film while curing can affect appearance in the form of an amine blush. NOTE: The 9104402 Fast Cure Activator may also be used in water immersion. Allow 7 days for full cure prior to beginning immersion service.