High solid Self levelling High Density Epoxy Coating 3 Gal 2:1 High solid Self levelling High Density Epoxy Coating is a 100% solid, two component epoxy coating system, designed to restore contaminated concrete floors. It shows orange peel and glossy finish while having high covering power. High solid Self levelling High Density Epoxy Coating provides excellent physical and chemical resistance as well as durability while maintaining its aesthetics appearance. Seamless plinths are optional with SCI-100-COVE. This system complies with the Canadian Food Inspection Agency (CFIA) and meets LEED standards. PRIMARY APPLICATIONS - Dry and humid treatment areas - Commercial and industrial buildings - Health care facilities - Laboratories - Surfaces where moderate mechanical and chemical resistance is needed - Recreation centers
- Minimum application of 10 mils for a smooth finish or orange peel texture may appear - Contains 100% solids, allowing for interior applications without harmful odors - Impermeable and seamless - Anti-slip texture that is easy to clean - Seamless coves can be shaped using SCI-100-COVE - Dense surface resistant to bacteria and moisture and easy to clean - Excellent adhesive properties, allowing for application on a wide variety of substrates - May apply several layers on itself with excellent adhesion - Controls contamination APPLICATION : 1st coat of PE700299 (8 mils) Apply the coat of (PE700299) using a rubber squeegee and pass a roller to obtain a uniform coating. If the primer option is not used it is advisable to apply PE700299 as the first coat for better adhesion. APPLICATION : 2nd coat of PE700299 (20 mils) Apply the top coat of (PE700299) using a rubber squeegee and pass a roller to obtain a uniform coating. Then pass a textured roller to obtain the uniform texture desired.