9100 System DTM Epoxy Mastic Immersion Activator: • For fresh or salt water immersion of steel or concrete where water temps do not exceed 52°C (125°F) • Great for use in floor-coating applications • Produces slightly lower gloss than standard activator not for use in potable water tanks
For water immersion service, use the 9102402 Immersion Activator. Do not use the 9102402 Immersion Activator with tint bases. This system may be used for both salt and fresh water; do not use for the inside of potable water tanks. Apply at air and surface temperatures between 60-100°F (15-38°C), when the surface temperature is at least 5°F (3°C) above the dew point, and when relative humidity is below 85%. Apply two coats alternating color between coats to ensure complete hide. Allow 7 days cure after application of the second coat before immersion.